Difference between revisions of "20170310-JleicIonIntegration"

Revision as of 13:25, 10 March 2017

Todd has developed a draft beam parameters spreadsheet (png), including input parameters and derived parameters
Note that these are explicitly beam parameters, (mostly) not accelerator hardware parameters (e.g. lattices, instrumentation, etc)
- Should we make the case to reorganize the parameters wiki area to separate beam and lattice parameters?
Three goals:
- Ensure consistency of design beam parameters at matchpoints between JLEIC machines
- Provide input to impedance and instability calculations, and broader beam simulation effort
- Serve as a machine-by-machine beam parameter reference for the eventual CDR

Bunch formation (Jiquan, Todd, Randy; Ed, Vasiliy)
- Most pressing immediate need is to characterize bunch formation plan through Booster and Collider rings
- All beams start as coasting beams at Booster injection, so no major impact from ion source/ion linac parameters
Ion source (Amy) / Linac (Todd/Brahim) / LtB / Booster injection (Ed)
- Linac cost
- Pulsed ion QWR/HWR gradients and RF control
- Booster space charge control
- Booster injection design
- Transverse/longitudinal emittance budget vs DC cooling
- Polarization
Booster extraction (Ed/Todd?) / Booster to Collider (Todd, Yves?) / Collider injection (Vasiliy?)
- Bucket to bucket synchro/cogging?
- Final beam stripping
- Polarization (AGS to RHIC transfer spin design chapter)
Coordination with other groups
- Beam cooling (Steve Benson et al.: Booster DC, Collider)
- Instability/impedance (Rui Li et al.)

@@ Line 3: / Line 3: @@
 ==== Agenda being developed ====
+==== Bunch Formation Progress ====
+* Todd has started evaluating bunch formation proposals from Jiquan
+* Spreadsheet and simulation (esme) progress
+* Involved cross-check between spreadsheet and esme
 ==== Beam Parameter Spreadsheet ====