Jay Benesch's publications
Jay Benesch's home page
  1. C. Reece, J. Benesch and J. Preble, "Refining and Maintaining Optimal Performance of the CEBAF SRF systems", Proceedings of the 2001 Particle Accelerator Conference.

  2. C. Rode, J. Benesch et al., "Jefferson Lab CEBAF Energy Upgrade Plans" Advances In Cryogenic Engineering vol 45, p 1261, ed. Q.S. Shu. Plenum Press 2000

  3. J.F. Benesch, "Statistical Analysis of RF Cavity Faults", IEEE Trans. Applied Superconductivity vol 9 #2, June 1999, p. 888

  4. M. Wiseman, J. Benesch et al., "Jefferson Lab IR FEL Cryomodule Modifications and Test Results", Proc. of the 1997 Particle Accelerator Conf.

  5. M.G. Tiefenback, L. Doolittle and J. Benesch, "Runtime Accelerator Configuration Tools at Jefferson Laboratory", Proc. of the 1997 Particle Accelerator Conf.

  6. J.F. Benesch and M. Wiseman, "Tests of a Prototype Magnetostrictive Tuner for Superconducting Cavities" IEEE Trans. Applied Superconductivity vol 7 #2, June 1997, p 375

  7. H. Liu, J. Benesch et al., “Modeling of space charge dominated performance of the CEBAF FEL injector”, Nuclear Instruments & Methods A 358 (1995) 475

  8. C. Reece, J. Benesch et al., "Performance of Production SRF cavities for CEBAF", Proc. of 1995 Particle Accelerator Conf. p 1512

  9. J.F. Benesch and J. Mammosser, "CEBAF's SRF Cavity Manufacturing Experience and Some Performance Limitations", IEEE Trans. Applied Superconductivity vol 5 #2, June 1995, p. 834

  10. J. F. Benesch and C. E. Reece, "CEBAF's SRF Cavity Manufacturing Experience", Advances In Cryogenic Engineering vol 39, p 597. ed. P. Kittel. Plenum Press 1994

  11. C. Reece, J. Benesch et al., "Performance of Production SRF Cavities for CEBAF", Proc. of the 1993 Particle Accelerator Conf. p 1016

  12. J. Mammosser, P. Kneisel and J. Benesch, "Analysis of Mechanical Fabrication Experience with CEBAF's SRF Production Cavities", Proceedings of the 1993 Particle Accelerator Conf., p 947

  13. J. Mammosser and J. Benesch., "Mechanical Results of the CEBAF Cavity Series Production", Proc. of the 1993 Particle Accelerator Conf. p 781

  14. H.F. Dylla, L.R. Doolittle and J. Benesch., "Operating Experience with High Beta Superconducting RF Cavities", Proc. of the 1993 Particle Accelerator Conf. p 748

  15. J.F. Benesch, "Preliminary Statistical Analysis of CEBAF's Cavity Pair Assembly Process Data", Proc. of the Sixth Workshop on RF Superconductivity, 1993, p 581

  16. C. Reece, J. Benesch et al., "Performance and Installation Status of Superconducting Cavities at CEBAF", 1992 Hamburg Conf. on High Energy Accelerators, vol 2, p. 951

  17. B.Dorri and J.F. Benesch, "Method of Optimizing Shim Coil Current Selection in Magnetic Resonance Magnets", U.S. Patent 5,006,804 (April 9, 1991)

  18. J.F. Benesch, "Passive Shimming Assembly for MR Magnet", U.S. Patent 4,990,877 (Feb. 5, 1991)

  19. J.F. Benesch, "Apparatus for Locating Passive Shim Guide Rails in MR Magnets", U.S. Patent 4,983,942 (Jan. 8, 1991)

  20. J.F. Benesch, "Superconductive Switch", U.S. Patent 4,803,456 (Feb. 7, 1989)

  21. T.E. Evans, P.M. Valanju, J.F. Benesch et. al., "Direct Observations of the Structure of Global Alfven Eigenmodes in a Tokamak Plasma", Phys. Rev. Letters 53 (1984), 1743
  22. R.D. Bengtson and J.F. Benesch, "Plasma Formation in a Tokamak", in Proc. of the NATO Advanced Study Institute on Electrical Breakdown in Gases, Part B, Plenum Press (New York) 1983
  23. S.A. Eckstrand, R.D. Bengtson and J.F. Benesch, "A Simplified Ohmic Heating Circuit for Tokamaks", IEEE Transactions Plasma Science 10 (1982) 207

  24. J.F. Benesch et.al., "Design of the PRETEXT Tokamak", Nuclear Technology/Fusion 3 (1982), 398

  25. J.F. Benesch, R.D. Bengtson and M.E. Oakes, "ICRF Preionization in the PRETEXT Tokamak", Proc. of the 4th International Conf. on RF Heating of Plasmas, 1981, paper A15

  26. J.F. Benesch and G.L. Cardwell, "Experimental Verification of a Poloidal Field Coil Code", Proc. of the 8th Symposium on Engineering Problems of Fusion Research, 1979, p 163